Our Advanced Motion Measurement Kit contains Light Gates and Motion QED which is a popular self-contained unit designed to store and calculate times, speeds and accelerations. 

Based on our exclusive Unilab Motion QED unit, the Advanced Motion Measurement Kit contains one each of the following:

• Motion QED unit,
• Master Light Gate,
• Slave Light Gate.
• DIN Leads

Motion QED Specification:

• Event Timer: From 2 to 8 readings, timing each event.
• Interval Timing: From 1 to 4 readings: up to 4 successive obstructions on any combination of the four inputs can be measured and displayed.
• Speed: From 1 to 4 readings: speeds (in meters per second, display shows m/s) are calculated and displayed for mask lengths of 1 to 10cm (in 1cm steps) or from 10 to 200cm (in 10cm steps).
• Gap Timer: From 1 to 3 readings: similar to Interval Timing with only the leading edge of an obstruction being recognised so that times between gates are recorded and displayed.
• Average Speed: 1 reading: based on the Gap Timing Mode above, this program calculates and displays an average speed (in m/s) between gates which are from 10 to 200cm apart (in 10cm steps).
• Acceleration: 1 or 2 readings: for a vehicle carrying a single or double mask of known length passing through successive gates, the acceleration is calculated and displayed (as m/s/s).

Technical Details:

• Inputs: 4 TTL inputs protected against misconnection up to 20V a.c. or d.c.; 4mm sockets with 1 'Manual' push-button.
• Outputs: 12V to power external devices such as light gates; 4mm sockets
• Power: 12 to 16V a.c. or d.c. from a low voltage power supply.
• Protection: two internal 500mA anti-surge fuses.
• Timing: times to ±1ms.
• Mass: 0.9kg.
• Dimensions: 240mm x 135mm x 45mm

The Unilab Light Gate is fully protected against incorrect connection of signal or power and supplies from 9 to 25V a.c or d.c. can be used. A signal LED indicates that the Light Gate is functioning correctly when obstructed.

• Up to eight transitions of the light gates can be sensed and the times stored by the Motion QED unit.

All items included in the kit are also available to purchase separately.